Our 4-column hydraulic presses can be used in practically every branch of industry in any technological process in which there are operations such as pressing, punching, stamping, drawing, pressing in, sizing, forming, bending, etc.
The range of production of hydraulic column presses by B&P Hydraulic Press ranges from models with a press force of 10 to 3,000T.
Each press model is designed according to individual customer requirements (individual bolster dimensions, number of cylinders, speed and geometry).
All main press elements (frame, cylinders, slide, bolster, hydraulic power unit, etc.) are made in our plant. We use components from renowned manufacturers such as Bosch Rexroth, Parker, Nord, SEW, Siemens, B&R, Allen Bradley, Mitsubishi, Sick, Keyence, Balluff, etc.
We carry out our projects comprehensively, from the identification of customer needs and the preparation of offers meeting the customer's requirements, through design and workmanship, to delivery combined with assembly, installation and commissioning at the customer's location.
Each press is issued with an EC Declaration of Conformity – a document confirming compliance with the New Approach directives (e.g. machine directive MD 2006/42/EC), allowing the manufacturer to apply the CE marking.
We provide warranty and post-warranty service.
Below are a few examples of column hydraulic presses designed and manufactured by
HYDRAPRES MT / B&P HYDRAULIC PRESS
.jpg)
The PHK-500A hydraulic press has a hydraulic actuator with adjustable pressing force and speed and is characterized by the following technical parameters:
|
Pressing force - maximum |
kN |
5000 |
|
|
Upward speed - work |
mm/s |
5 |
|
|
Upward speed – fast approach |
mm/s |
12 |
|
|
Downward speed – return |
mm/s |
50 |
|
|
Stroke - maximum |
mm |
700 |
|
|
Daylight |
mm |
1350 |
|
|
Distance between columns (right-left) |
mm |
1150 |
|
|
Distance between columns (front-rear) |
mm |
535 |
|
|
Overall dimensions |
Height from the flooring |
mm |
~4000 |
|
Width |
mm |
~3300 |
|
|
Depth |
mm |
~2400 |
|
|
Overall dimensions of electrical cabinet
|
Height |
mm |
1200 |
|
Width |
mm |
800 |
|
|
Depth |
mm |
300 |
|
|
Mass of the press and the hydraulic power unit without oil |
kg |
~23 000 |
|
|
Maximum pressure in the hydraulic system |
MPa |
28 |
|
|
Oil tank capacity of the hydraulic power unit |
dm3 |
1000 |
|
| Type of Hydraulic oil |
|
HL 46 |
|
|
Oil and air filtration accuracy in the hydraulic power unit tank |
mm |
10 |
|
|
Main electric-motor power / Installed power |
kW |
30 / ~36 |
|
|
Adaptation to a protective system |
|
TN-C lub TN-S |
|
| Power supply |
V/Hz |
3x400 / 50 |
|
|
Voltage tolerance |
% |
Od -10 do +10 |
|
|
Frequency tolerance |
% |
Od -2 do +2 |
|
| Main fuses |
A |
3x80 (delayed) |
|
|
Environmental conditions according to PN-EN 60204-1:2001 p. 1.3 |
|
Normal |
|
|
Painting |
|
tbd | |
The 4-column hydraulic press PHK-20A with maximum pressing force 20T (200 kN) is designed for various types of metal forming operations, such as: punching, stamping, pressing, pressing, etc.
The hydraulic press PHK-20A has a hydraulic actuator with adjustable pressing force and speed and is characterized by the following technical parameters:
|
Pressing force - maximum |
kN |
200 |
|
|
Return force |
kN |
20 |
|
|
Downward speed (fast approach) - adjustable |
mm/s |
50 ÷ 300 |
|
|
Downward speed (work) - adjustable |
mm/s |
10 ÷ 30 |
|
|
Upward speed (return) - adjustable |
mm/s |
50 ÷ 300 |
|
|
Stroke - adjustable |
mm |
0 ÷ 500 |
|
|
Maximum distance between the slide and press table |
mm |
1000 |
|
|
Minimum distance between the slide and press table |
mm |
500 |
|
|
Distance between columns (right-left) |
mm |
800 |
|
|
Distance between columns (front-rear) |
mm |
750 |
|
|
Press table and ram dimensions (width x depth) |
mm |
800 x 1000 |
||
|
Distance between the press table from the floor |
mm |
800 ±5 |
||
|
T-slots in the press table and ram plate |
mm |
tbd | ||
|
Overall dimensions |
Height |
mm |
3500 |
|
|
Width |
mm |
1750 |
||
|
Depth |
mm |
1500 |
||
|
Mass of the press and the hydraulic power unit without oil |
kg |
~3000 |
||
|
Oil tank capacity of the hydraulic power unit |
dm3 |
~380 |
||
|
Type of Hydraulic oil |
|
HL 46 |
||
|
Oil filtration accuracy in the hydraulic power unit tank |
μm |
10 |
||
|
Maximum pressure in the hydraulic system |
MPa |
28 |
||
|
Maximum pressure in the pneumatic system |
MPa |
0,6 |
||
|
Main electric-motor power / Installed power |
kW |
11 / 14 |
||
|
Power supply |
V/Hz |
3x400 / 50 |
||
|
Main fuses |
|
3x40 (delayed) |
||
|
Adaptation to a protective system |
|
TN-S |
||
|
Painting |
|
tbd |
||
The 4-column hydraulic press PHK-40A with maximum pressing force 40T (400 kN) is designed for various types of metal forming operations, such as: punching, stamping, pressing, pressing, etc.
The press PHK-40A has a hydraulic actuator with adjustable pressing force and speed and is characterized by the following technical parameters:
|
Pressing force - adjustable |
kN |
30 – 400 |
|
|
Return force |
kN |
70 |
|
|
Downward speed (fast approach) – maximum |
mm/s |
280 |
|
|
Downward speed (at max. pressing force) – maximum |
mm/s |
30 |
|
|
Upward speed (return) – maximum |
mm/s |
280 |
|
|
Stroke of the main cylinder - adjustable |
mm |
15 - 350 |
|
|
Daylight (maximum distance between the ram and the press table) |
mm |
600 |
|
|
Distance between columns |
mm |
500 |
|
|
Diameter of the centering hole in the tool plate |
mm |
tbd |
|
|
T-slots in the press table and tool plate |
mm |
tbd |
|
| Distance between the press table and flooring |
mm |
840 +/-7 |
|
| Overall dimensions |
Height |
mm |
~ 3 590 |
|
Width |
mm |
~ 900 |
|
|
Depth |
mm |
~ 1 620 |
|
|
Mass of the press and the hydraulic power unit without oil |
kg |
~ 2 300 |
|
|
Oil tank capacity of the hydraulic power unit |
dm3 |
420 |
|
|
Nominal pressure in the hydraulic system |
bar |
280 |
|
|
Nominal pressure in the pneumatic system |
bar |
6 |
|
|
Compressed air from an industrial plant according to: PN-ISO 8573-1:2001 |
|
Class 5.4.5 |
|
|
Main electric-motor power / Installed power |
kW |
15 / 18 |
|
|
Adaptation to a protective system |
|
TN-C lub TN-S |
|
|
Power supply |
V/Hz |
3x400 / 50 |
|
|
Voltage tolerance |
% |
From -10 to +10 |
|
|
Frequency tolerance |
% |
From -2 to +2 |
|
|
Main fuses |
A |
40 (delayed) |
|
|
Environmental conditions according to PN-EN 60204-1:2001 p. 1.3 |
Normal | ||
|
Painting |
|
tbd |
|
