These hydraulic presses are commonly referred to as 'H' type presses because of the characteristic shape of the machine body resembling the 'H' letter.
Our hydraulic presses can be used in practically every branch of industry in any technological process in which there are operations such as pressing, punching, stamping, drawing, pressing in, sizing, forming, bending, etc.
We specialize in designing and manufacturing hydraulic presses made on the basis of individual needs and requirements of our customers with the possibility to choose the main features, as well as functionality and functional parameters.
We offer hydraulic presses with a pressing force (tonnage) from 10T to 3 000T. All main press elements (frame, cylinders, slide, bolster, hydraulic power unit, etc.) are made in our plant. We use components from renowned manufacturers such as Bosch Rexroth, Parker, Nord, SEW, Siemens, B&R, Allen Bradley, Mitsubishi, Sick, Keyence, Balluff, etc.
We carry out our projects comprehensively, from the identification of customer needs and the preparation of offers meeting the customer's requirements, through design and workmanship, to delivery combined with assembly, installation and commissioning at the customer's location.
Each press is issued with an EC Declaration of Conformity – a document confirming compliance with the New Approach directives (e.g. machine directive MD 2006/42/EC), allowing the manufacturer to apply the CE marking.
We provide warranty and post-warranty service.
Below are a few examples of presses designed and manufactured by
HYDRAPRES MT / B&P HYDRAULIC PRESS
The H-frame hydraulic press PHR-200L with a maximum pressing force 200T (2000 kN) is designed to perform various types of metal forming operations such as: punching, stamping, drawing, pressing, etc. The press has a function of fast approach and fast return, which increases the machining efficiency by shortening the time of idle movements. Additionally, a set of adjustable shock-absorbers (hydraulic shock absorbers) was applied in the press to slow moving masses down and absorb energy during material breakage.
The PHR-200L press has a hydraulic cylinder with adjustable pressing force and speed and is characterized by the following technical parameters:
|
Pressing force - adjustable |
kN |
100 - 2000 |
|||
|
Return force - maximum |
kN |
120 |
|||
|
Pressing force of the ejector in the ram - adjustable |
kN |
10 ÷ 150 |
|||
|
Pressing/resistance force of the ejector/cushion in the press table - adjustable |
kN |
30 ÷ 800 |
|||
|
Downward speed (fast approach) - maximum |
mm/s |
500 |
|||
|
Downward speed (work) - at pressing force to 1400 kN |
mm/s |
55 |
|||
|
Downward speed (work) - at pressing force from 1400 to 2000 kN |
mm/s |
55 ÷ 40 |
|||
|
Downward speed (work) - at pressing force 2000 kN |
mm/s |
40 |
|||
|
Upward speed (return) - maximum |
mm/s |
600 |
|||
|
Speed of the Ejector in the ram – adjustable |
mm/s |
50 ÷ 220 |
|||
|
Speed of the ejector/cushion in the press table – adjustable |
mm/s |
30 ÷ 100 |
|||
|
Main cylinder stroke - adjustable |
mm |
10 ÷ 500 |
|||
|
Stroke of the Ejector in the ram – adjustable |
mm |
10 ÷ 250 |
|||
|
Stroke of the ejector/cushion in the press table – adjustable |
mm |
10 ÷ 200 |
|||
|
Resistance force of the hydraulic Shock Absorber |
kN |
2 x 200 |
|||
|
Stroke of the hydraulic Shock Absorber |
mm |
40 |
|||
|
Daylight (distance between the press table and the ram) |
mm |
800 |
|||
|
Distance between press body sides (left - right) |
mm |
1000 |
|||
|
Press table dimensions |
mm |
1000 x 1000 |
|||
|
Ram tool plate dimensions |
mm |
1000 x 1000 |
|||
|
Distance between the press table and flooring |
mm |
1000 ±5 |
|||
|
T-slots in the press table and tool plate |
|
tbd |
|||
|
Diameter of the Ejector piston rod in the ram |
mm |
Ø 70 |
|||
|
Ejector/cushion plate dimensions |
mm |
750 x 750 |
|||
|
Diameter of the Ejector/cushion pins |
mm |
tbd | |||
|
Quantity of the Ejector/cushion pins |
pcs |
tbd | |||
|
Position of the Ejector/cushion pins |
|
tbd | |||
|
Maximum tooling dimensions |
length (depth) |
mm |
800 |
|
|
width |
mm |
1000 |
||
| height |
mm |
600 |
||
|
Maximum tooling weight |
overall |
kg |
2000 |
|
|
section mounted to the ram |
kg |
1000 |
||
| Overall press dimensions |
height |
mm |
~4 200 |
|
|
width without electrical cabinet / width with electrical cabinet |
mm |
~2 000 / ~2400 |
||
| depth |
mm |
~2 300 |
||
|
Mass of the press and the hydraulic power unit without oil |
kg |
~17 000 |
||
|
Oil tank capacity of the hydraulic power unit |
dm3 |
~1000 |
||
|
Type of Hydraulic oil |
|
HL 46 |
||
|
Nominal pressure in the hydraulic system |
MPa |
33 |
||
|
Oil and air filtration accuracy in the hydraulic power unit tank |
μm |
10 |
||
|
Nominal pressure in the pneumatic system |
MPa |
0,6 |
||
| Compressed air from the industrial plant according to: PN-ISO 8573-1:2001 |
|
Class 5.4.5 |
||
|
Main electric-motor power / Installed power |
kW |
90 / 100 |
||
|
Adaptation to a protective system |
|
TN-C lub TN-S |
||
|
Power supply |
V/Hz |
3x400 / 50 |
||
|
Voltage tolerance |
% |
From -10 to +10 |
||
|
Frequency tolerance |
% |
From -2 to +2 |
||
|
Main fuses |
A |
3x300 (delayed) |
||
|
Environmental conditions according to PN-EN 60204-1:2001 p. 1.3 |
|
Normal |
||
|
Painting |
|
tbd |
||
The H-frame hydraulic press PHR-600B with a maximum pressing force of 600T (6000 kN) is designed to perform various types of metal forming operations such as: punching, stamping, pressing, etc.
The PHR-600B press has a hydraulic cylinder with adjustable pressing force and speed and is characterized by the following technical parameters:
|
Pressing force - adjustable |
kN |
570 – 6 000 |
|
|
Return force - maximum |
kN |
2 000 |
|
|
Downward speed (fast approach) |
mm/s |
10 |
|
|
Downward speed (work) |
mm/s |
4,8 |
|
|
Upward speed (return) |
mm/s |
10 |
|
|
Stroke |
mm |
350 |
|
|
Daylight (maximum distance between the tool plate and the press table) |
mm |
1 095 |
|
|
Distance between press body sides (left - right) |
mm |
2 100 |
|
|
Dimensions of the tool plate |
mm |
2 000 x 1 000 |
|
|
Dimensions of the press table |
mm |
2 000 x 1 000 |
|
|
T-slots in the press table and tool plate |
|
tbd |
|
|
Distance between the press table and flooring |
mm |
900 |
|
|
Overall dimensions |
Height |
mm |
~3 960 |
| Width |
mm |
~ 4 750 |
|
| Depth |
mm |
~ 2 200 |
|
|
Mass of the press and the hydraulic power unit without oil |
kg |
~30 000 |
|
|
Oil tank capacity of the hydraulic power unit |
dm3 |
~500 |
|
|
Type of Hydraulic oil |
|
HL 46 |
|
|
Nominal pressure in the hydraulic system |
MPa |
27 |
|
|
Oil and air filtration accuracy in the hydraulic power unit tank |
μm |
10 |
|
|
Nominal pressure in the pneumatic system |
MPa |
0,6 |
|
| Compressed air from the industrial plant according to: PN-ISO 8573-1:2001 |
|
Class 5.4.3 |
|
|
Main electric-motor power / Installed power |
kW |
37/39 |
|
|
Adaptation to a protective system |
|
TN-C lub TN-S |
|
|
Power supply |
V / Hz |
3x400 / 50 |
|
|
Voltage tolerance |
% |
From -10 to +10 |
|
|
Frequency tolerance |
% |
From -2 to +2 |
|
|
Main fuses |
A |
3x100 (delayed) |
|
|
Environmental conditions according to PN-EN 60204-1:2001 p. 1.3 |
|
Normal |
|
| Painting |
|
tbd | |
The H-frame hydraulic press PHR-20A with a maximum pressing force of 20T (200 kN) is designed to perform various types of metal forming operations such as: punching, stamping, pressing, etc.
The PHR-20A hydraulic press has a hydraulic cylinder with adjustable pressing force and speed and is characterized by the following technical parameters:
|
Pressing force – maximum |
kN |
200 |
|
|
Return force – maximum |
kN |
20 |
|
|
Downward speed - maximum |
mm/s |
160 |
|
|
Downward speed at 200kN pressing force |
mm/s |
25 |
|
|
Upward speed - maximum |
mm/s |
260 |
|
|
Stroke |
mm |
350 |
|
|
Daylight (maximum distance between the tool plate and the press table) |
mm |
600 |
|
|
Press table dimensions (width x depth) |
mm |
560 x 450 |
|
|
T-slots in the press table and tool plate |
|
tbd | |
|
Distance between columns |
mm |
700 |
|
|
Distance between the press table and flooring |
mm |
1000 ±5 |
|
|
Overall dimensions |
Height |
mm |
2 850 |
|
Width |
mm |
1 550 |
|
| Depth |
mm |
1600 |
|
|
Mass of the press and the hydraulic power unit without oil |
kg |
~2400 |
|
|
Oil tank capacity of the hydraulic power unit |
dm3 |
~300 |
|
| Type of Hydraulic oil |
|
HL 46 |
|
|
Nominal pressure in the hydraulic system |
MPa |
28 |
|
|
Nominal pressure in the pneumatic system |
MPa |
0,6 |
|
|
Main electric-motor power / Installed power |
kW |
7,5 / ~8,5 |
|
|
Adaptation to a protective system |
|
TN-C lub TN-S |
|
|
Power supply |
V/Hz |
3 x 400 / 50 |
|
|
Voltage tolerance |
% |
From -10 to +10 |
|
|
Frequency tolerance |
% |
From -2 to +2 |
|
|
Main fuses |
A |
3x40 (delayed) |
|
|
Environmental conditions according to PN-EN 60204-1:2001 p. 1.3 |
|
Normal |
|
|
Painting |
|
tbd |
|
